Product
Grade 80 Lifting Chain
Grade 80 alloy steel short-link lifting chain of the Mn-Ni-Cr-Mo type, heat treated and manufactured to EN 818-2 for overhead lifting and chain slings. Proof tested to 2.5 times the working load limit. Minimum breaking load 4 times the working load limit. Design factor 4 to 1.
At a glance
- Standard
- EN 818-2
- Grade
- Grade 80
- Design factor
- Proof 2.5x WLL, MBL 4x WLL
- Table rows
- 34 pitch variants in catalogue
Standards
Standards and selection
- EN 818-2
- Grade 80 alloy steel of the Mn-Ni-Cr-Mo type, heat treated, manufactured to EN 818-2 for overhead lifting and chain slings.
- Proof and MBL
- Proof tested to 2.5 times the working load limit. Minimum breaking load 4 times the working load limit. Design factor 4 to 1.
Specifications
Verified values only
Excerpt of verified G80 calibrated hoist-chain WLL rows. Pitch variants share diameter; confirm size (d x p) in the quote. Full table on the Round link chain family page.
| Size (d x p) | Diameter (mm) | WLL (t) | Test load (kN) | Breaking load (kN) |
|---|---|---|---|---|
| 6 x 18 | 6 | 1.1 | 27 | 45.2 |
| 7 x 21 | 7 | 1.5 | 37 | 61.6 |
| 8 x 24 | 8 | 2 | 48 | 80.4 |
| 10 x 30 | 10 | 3.2 | 76 | 125 |
| 11 x 43 | 11 | 3.8 | 92 | 154 |
| 12 x 36 | 12 | 4.6 | 109 | 181 |
| 12.5 x 38 | 12.5 | 4.9 | 117 | 196 |
| 13 x 39 | 13 | 5 | 128 | 214 |
Certificates
Related certification path
Catalogue archive scans support buyer source-checking. Named society certificates for a specific order are issued on request.
Exact stock and accessory combinations remain subject to inquiry. Mining chain and Grade 100/120 lines stay on the family page as separate catalogue paths.
Next step
Request a quote for Grade 80 Lifting Chain
The form carries this product family as context. Include size, grade or standard, application, and any class-society requirement.